DYWIDAG-SYSTEMS INTERNATIONAL
Click to expand
DSI Underground  ›  Underground Construction  ›  Support System  ›  Liner Plates

Liner Plates

 
Liner Plates General Requirements

DSI's selection of underground supports, the widest in the world, affords the contractor, the designer, and the owner a matchless combination of high performance and tunneling at low cost. One of these products alone - liner plates - offers these outstanding advantages:

  • Economy of construction in time, excavation, material, manpower.
  • Maximum support per given length with minimum weight of steel.
  • Standard variation of plate design for all shapes of tunnels in dry or wet ground.
  • Predictable strength, fire resistant.
  • Continuous support during the critical mining phase in soft ground tunneling.
  • Easy to store, handle and erect, whether the tunnel is straight, curved, circular, elliptical or horseshoe in shape.
  • Gasket plates that seal joints, stop water leakage and reduce air loss when water is a problem.

Steel liner plates provide a relatively light-weight, easy-to-handle, safe support for soft ground tunneling because the ground that supplies the loading also supplies the resistance to the load. The liner plate assembly simply distributes and transmits the load to the surrounding earth. As a steel liner plate ring takes load vertically, it tends to deflect inward at the top and outward at the sides. The ground resists deflection of the lining by developing a passive force equal in magnitude and opposite in direction to the force exerted by that of the lining. The diagram on the left illustrates this principle.

The ability of the surrounding ground to resist the outward bulge of the liner plate ring is the key to vertical load support. With the ring confined to a small amount of deflection, the thrust line induced by the load is forced to follow the ring of liner plates. Thus, the ability of the assembly to withstand the applied load depends upon its ability to transmit ring thrust from plate to plate around the ring. Obviously, this ability is enhanced by the four-flange design of DSI's plates.

Liner Plates

There are various methods for determining the required strength of tunnel linings. Nevertheless, the type of ground, the location and depth of cover, the size and length of the tunnel, level of ground water, superimposed loading, and history always guide these calculations.

DSI liner plates can be purchased in 16" and 24" widths as corrugated or smooth plates. Liner plates are formed from one piece of metal to provide longitudinal and circumferential flanges. The plates can be galvanized and/or bituminously coated and grout holes with plugs can be included. For special conditions gasketed liner plates and tapered liner plates can also be manufactured. Liner plates can be installed alone or in conjunction with steel ribs if additional support is required.

dsi map overlay